We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.

Diaroc Grinding Pin for DTH Hammer Bits

Views : 1776
Update time : 2024-01-24 15:08:10
Button bits grinding pin & cups from 7mm to 25mm

we design and produce the BTON200,BTON500 and Pneumatic Robot Arm AGM18 etc. pneunatic buttong bits grinding machine.
A full spares back-up service is also available. Also produce the grinding pins/cups, available with a choice of Hemispherical, Ballistic Semi Ballistic, Paraboloid or Conical pins, in sizes 7mm to 25mm.
Other sizes available on request.

PREVENTION MEASURES AND INSTRUSTIONS FOR MACHINES OPERATORS
BEFORE USE:
Check that the machine is stable and that the grinder is correctly and tightly fitted to the machine.
Check the integrity of the guards protecting parts in motion.

DURING USE:
Report immediately any inappropriate functioning or dangerous situations;
The operator's position needs to be such as not to be in contact with the parts in movement;
Do not remove or modify protection devices;
Do not intervene on mobile parts during the functioning of the machine;
Do not get distracted.

AFTER USE:
Correctly position the machine without leaving the tool suspended;
Carry out the review and maintenance operations needed to reuse the machine with the power supply disconnected;
In the maintenance operations comply with the indications of this manual;
Clean the machine.

Diamond Grinding Cups

1.Wing (shoulder) drive grinding cup for, with a 8mm diameter shaft(shank) and one O-ring. Suitable for Atlas Copco LSD machines, Jasco, Dorey and KING PIN grinding machine.

2.San drive grinding cup, with a 9mm diameter shaft(shank), suitable for all grinding machines.

3.55 drive grinding cup is for all Atlas grinding machines.

4.Internal hex drive grinding cup is for all CME grinding machines.
Item Size(mm)
For button sharpening 6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/24/25
For steel removing 7-8, 9-10, 11-12, 13-14, 15-16, 17-18, 19-20
Profile Semi-ballistic/Hemi-spherical
Diaroc Grinding Pin for DTH Hammer Bits


All series button bit grinding machine.
1.Hand-held button bit grinder BTON200
Machine Model BTON200
Air pressure, max 5-7 bar (100psi)
Air consumption 2m3/min (50ft3/min) 
Rate power 1.5kw
Idling speed 20,000 rpm
Water flushing
presuure, max
4 bar (60psi)
Hose diameter, air 19 mm(1/2)
Hose diameter, water 4mm 
Weight, exclude hoses 3.2 kg
Sound level 80 dB
Grinding button size Φ7-25 mm
 
2.Semi-automatic Button Bit Grinder BTON500
Machine Model BTON500
Rotation speed: 20000 rpm
Motor:  Pneumatic (air powered)  
Work pressure:  5-7 bar (100 psi)
Max. air pressure:  8 bar (115 psi)
Air consumption:  2.0 m3 / min (80ft3/min)
Max. water pressure:  4 bar (60 psi)
Air hose diameter:     19 mm  
Water hose diameter:  6 mm
Weight excl. packaging: 120 Kg  
Weight incl. packaging:  130 Kg  
Packing dimensions:  500*500*1400mm
Sound level: 92 dB(A)

3.Pneumatic Robot Arm Grinder - AGM18
Machine Model AGM18
Rotation speed: 20000 rpm
Motor:  Pneumatic (air powered)  
Work pressure:  5-7 bar (100 psi)
Max. air pressure:  8 bar (115 psi)
Air consumption:  2.0 m3 / min (80ft3/min)
Max. water pressure:  4 bar (60 psi)
Air hose diameter:     19 mm  
Water hose diameter:  6 mm
Weight excl. packaging: 330 Kg  
Weight incl. packaging:  350 Kg  
Packing dimensions:  1600*700*1500mm
Sound level: 92 dB(A)

Diaroc Grinding Pin for DTH Hammer Bits
Related News
Read More >>
What is the principle of carbon dioxide CO2  gas blasting to crack rocks? What is the principle of carbon dioxide CO2 gas blasting to crack rocks?
Jun .26.2024
What is the principle of carbon dioxide CO2  gas blasting to crack rocks?
Carbon dioxide  CO2  gas blasting is a technology that uses high-pressure carbon dioxide gas to apply huge pressure to rocks, and in this way, rocks are blasted and broken. This technology uses the characteristics and principles of carbon dioxide gas to crack rocks through the pressure difference generated inside the rock while applying high pressure.
Excavator drilling and splitting machine instructions Excavator drilling and splitting machine instructions
Jun .26.2024
Application scope of large-scale airborne hydraulic rock splitter Instructions for use of excavator drilling and splitting machine
The integrated drilling rig is a new type of highly integrated, efficient and environmentally friendly equipment that can be widely used in complex working conditions such as open-pit mines, engineering construction, and tunnel excavation.
Reinforced concrete crushing and demolition Reinforced concrete crushing and demolition
Jun .26.2024
This article mainly introduces several tools and methods for reinforced concrete demolition and blasting: hydraulic crushing shears, hydraulic crushing shears, hydraulic pile breaker, etc.
The difference between pneumatic pick and electric pick The difference between pneumatic pick and electric pick
Jun .26.2024
Pneumatic pick is driven by wind and is a type of pneumatic tool.
Electric pick is driven by electricity and is a type of electric tool.